Medusa Detector Operating System (mDOS)

This manual describes how to use a Medusa gamma-ray spectrometer that is equipped with the Medusa Detector Operating System. All of the Medusa systems that are produced from April 2021 onward are equipped with the electronics to accommodate this smart measurement system. This instruction manual is valid for the series of detectors listed below.

• https://radiometrics.atlassian.net/wiki/spaces/PD/pages/6652051
• https://radiometrics.atlassian.net/wiki/spaces/PD/pages/6652041
• https://radiometrics.atlassian.net/wiki/spaces/PD/pages/6652107
• https://radiometrics.atlassian.net/wiki/spaces/PD/pages/6651961
• https://radiometrics.atlassian.net/wiki/spaces/PD/pages/6652060
• https://radiometrics.atlassian.net/wiki/spaces/PD/pages/6652014
• https://radiometrics.atlassian.net/wiki/spaces/PD/pages/6652024

Contents of this manual

0. Quick start

1. Power and access

2. LEDs

3. mDOS interface

4. Technical data

mDOS endpoint documentation

mDOS JSON documentation

mDOS NMEA documentation

Frequently Asked Questions

Changelog

mDOS V3.1 (31-12-2021):
- Added the always start in paused mode option
- Added the incoming data view block on the spectrum page
- Added the option to use different plot ranges to plot the points on the map
- Resolved settings storage bugs
- Improved the response of the interface
- Added support for the multidetector system

{}