Appearance
MDC-70x cable
| Communication protocol | None |
|---|---|
| Last spectrometer | Active |
| Voltage protection | No voltage protection |
| Connector A | TE Connectivity T4110002031-000 |
| Connector B | Flying leads |
The MDC-70x communication cables can be used to power the PUCK-500. Note that the cables are not equipped with an under- and overvoltage protection circuit.
Please contact Medusa if the cable needs servicing.
Variants
| MDC-700 | Can be used to power the PUCK-500 |
|---|
Pin numbering
| TE Connectivity T4110002031-000 Note: Pin numbering as seen from the back side. |
|---|
Pin description (TE Connectivity Lemo connector)
| # | Description | Wire color |
|---|---|---|
| 1 | Power | Red |
| 2 | ground | Black |