MSB-20x mounting brackets

The MSB-200 (picture on the left) and MSB-201 brackets can be used to mount the carbon Medusa MS-1000, MS-1200 and MS-2000 spectrometers on a quad, drone or other vehicle. They can be used with spectrometers numbered 2018T044.025 and later. The MSB-201 bracket is wider in the middle and has only a single mounting hole on the outside, where the MSB-200 bracket has two holes in the middle. Other mounting options can be found here.

For mounting the rubbers onto a vehicle, it is recommended to use stainless steel M4 bolts with a 16mm (nylon) spacer between rubber and bolt. A usable spacer is produced by duratool, article number DT000343. Make sure to use a bolt with a wide head, or use an additional washer.

Latest code	Active
Aluminium cover
Rubbers		'Instrument' mounts Produced by Flexico Article number 039 18 023 40 shore
Drawing	MSB-200.pdf MSB-201.pdf MSB-201 v3.step

Spectrometer configurations

The drawings below show how the brackets can be used with some spectrometers. Click on an image to enlarge.

MSB-200 with MS-1000	MSB-200 with MS-2000	MSB-201 with MS-2000