Skip to main content
Skip table of contents

Cables and connectors

In the course of time, several different data cables were created for our detector systems. Below you find a list.


Communication only cable used with spectrometers using the RS-232 protocol.

Simple PoE (Power over Ethernet) cable without voltage protection. Often used together with a PoE injector unit.

Combined power and ethernet cable with a Lumberg connector. The MDC-300 cables include a voltage protection circuit.

Combined power and ethernet cable with a Lemo connector. Includes a voltage protection circuit.

USB power and possible communication. Developed for powering the spectrometer from a powerbank.
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.