Detector handle

An optional accessory for the MS-350, MS-700 and MS-1000 detectors is the detector handle that contains a battery. The handle contains two, three or four batteries and will power the sensor for a whole survey.

The power connection is through a USB cable, and therefore it can be used in combination with a standard MDC-505 USB cable. Making it possible to use any power bank as a backup when the survey lasts longer than the battery inside the handle.

The handle can be removed by removing the M4 screws at the interface between the blue detector caps and the aluminum handle, making it possible to easily switch from handheld survey mode to mounting it under a drone.

Versions

MS-350	MS-700	MS-1000
Up to 8 hours battery	Up to 10 hours battery	Up to 12 hours battery